We had people ask if we are running a sale this year and we are. Click here to read the details as there are several. This sale is a little different as we are allowing it to apply to most packaged parts.
Beiträge von CorkSport-Derrick
-
-
We have our 11% off sale tomorrow. It is for 24hour only and there are some limitations which you can learn about at this link.
-
The always affordable and dashingy handsome CorkSport Valve cleaning toolis now available!
Yes I know you all think WTF CorkSport, why do I need this? It's you all be dirty dirty on the valves with your Mazdaspeeds that is why.
Instead of the duct tape and jury rigged attachments we wanted to make walnut blasting easier.
We went with a 2 ply reinforced silicone which is sturdy for the task but has some give to seal against the cylinder head without having to be a body builder.
We designed the kit for the Mazdaspeed 3, Mazdaspeed 6 and Cx7 turbo but it should work on any other direct injected vehicle but fitment is not guaranteed.
They are in stock and ready to rock.
-Derrick
-
We are happy to announce the release of our 72mm throttle body spacer. Its aluminum and our throttle body spacer works with the OEM or our 72mm throttle body. It is designed to work with most meth injector nozzles on the market.
We setup the throttle body spacer to work work larger intake manifolds like ours or JMF. Post or PM if you have any questions.
-Derrick
-
We decided to include the left out MPS 6 owners to our offering of a true big brake kit.
This is different from our caliper upgrade kit which uses the stock rotors. This kit includes 330 diameter x 28mm rotors, the calipers are much larger over our caliper upgrade kit.
Yes you need different wheels to use this kit or a 25mm spacer on stock wheels to clear the calipers. We have a wheel fitment template here
The box is sized so we can send it via the post.
-Derrick
-
We have a new product for the Mazda MPS 3/6 and Cx7 turbo, a bolt on 72mm throttle body. This is a completely new unit with OEM electronics which makes it a bolt
on upgrade.
You can read about how we came up with the design on our blog or you can check out the product listing here. The throttle body is $329.99 and in stock.
When installed on a Mazdaspeed with a GT3582 we saw a quicker spool time and an increase in mid range power.
If you are using the TMIC we have an option to include a new silicone elbow to make this a bolt in kit.
-Derrick
-
-
The shipping price for the line via the lowest cost method we have is ~137 Euro with the current exchange rate.
-Derrick
-
We have a new part for the MPS3 and MPS6, the high pressure fuel line from the pump to the rail. The high pressure fuel line which includes alternate fuel compatibility, including beer! Check out the link for more details
-Derrick
-
We have a new release for the 2010-2013 MPS 3 the leather E-brake handle. It has an aluminum wrapped in black leather with red stitching and is available for $69.99. It is designed to match our leather shift knob and soon to be release 2010-2013 Mazda 3 leather steering wheel.
You can find it here at Corksport.com
Derrick
-
Good news, we have brought back the 2010-2013 MPS 3 airbox which works with our stage II SRI.
Link for the Mazdaspeed 3 Airbox
We have plenty of stock on hand.
-Derrick
-
We have the 2007-2009 MPS 3 Battery Box/ECU Relocation kits finished and ready to ship out
The box is made from thermoformed ABS plastic and include an easy to remove (no tools required) lid.
Click here to get more details on the MPS3 Box.
-Derrick
-
We have a new part for the MPS 3/6 and Cx7 turbo!
Yes we went off and made a PNP 3.5 bar MAP sensor for the MPS 3/6. We made it easy to setup by including the setup scalars and have them on the sensor itself to keep it simple for the installation. They are in stock and ready to ship out.
Yes the above statement is not a typo, this is a plug and play part, no adapter harness is needed.
-Derrick
-
We have removed the airboxes from our site but we have 3 left which are cosmetically not up to standards with some blemishes on them. Functionally they work great, they just do not look the best. If someone is intersted in one let me know.
Thanks
Derrick -
We have another new part for the MPS 3 and MPS 6, our ceramic coated heat shield which is made from 5052 aluminum. The CorkSport Exhaust Manifold Heat Shield works on both TMIC and FMIC setup vehicles.
If you have any questions about the piece let me know.
-Derrick
-
Hello,
I wanted to post up and say hi! I am here to do my best to answer questions/concerns about our products which we offer for the MPS 3/MPS 6.
A little about myself, I am one of the owners of CorkSport which we started in 1998. I have owned a wide range of Mazdas from 323GTX to B2600 trucks, Rx7s, Mazdaspeed 3s. etc. I have one of the new 2016 MX5s on order right now and I drive the shop Mazdaspeed 3 when it is not taken apart for product development. I also race the CorkSport Mazda 2 in SCCA B-Spec for the last 4 years now. The picture below is from the 2014 SCCA Runoffs at Mazda Raceway Laguna Seca.
-Derrick